
Built for professional lighting rigs
Every HyperCube speaks Art-Net. Run its built-in patterns from your lighting console, or take over every LED with your pixel mapping software.
Fixture files for your console, plus the full Art-Net / DMX guide
control channels
built-in patterns
color palettes, plus custom colors
Two ways to take control
Use either one, or both in the same show.
Run our patterns from your desk
Patch the 16-channel control profile and the HyperCube's own patterns become part of your show, cued and faded like any other fixture.
- Pick any of 95 patterns, or let Standard, Calm or Sound Reactive mode cycle through them
- Dimmer, speed and intensity on faders
- Set your own primary and secondary colors, or choose one of 25 palettes
- Step to the next or previous pattern from a button
Import the GDTF profile into your console, or set the channels by hand in QLC+, TouchDesigner or a fader app.
Drive every LED yourself
Send RGB to every LED from your media server or your console's pixel mapper, and the cube becomes a canvas for your own content.
- Map from Resolume, MadMapper, xLights, TouchDesigner and more
- No console needed: the cube shows pixel data as soon as it arrives
- GDTF Pixel profiles for the HyperCube Nano, 10-SE and 15-SE
- Larger pieces span 2–3 universes and set up as a single fixture
Running both? Channel 1 of the control profile switches the cube between its own patterns and your pixel content.
Made to drop into your rig
No extra hardware. HyperCubes join your DMX network and work alongside the rest of your lighting.
Standard Wireless Art-Net
HyperCubes take Art-Net over Wi-Fi from your console or media server, broadcast or unicast. Control is wireless only, with no wired DMX input. The Hyperspace app shows each cube's IP.
One address, whole rig
Every cube ships on universe 1, channel 1, so one patched fixture drives them all. Give cubes their own addresses in the app when they need to do different things.
Always in step
Cubes share animation timing over the network, so patterns stay in sync across the room. Rigs that mix firmware versions work too.
Set up in the app
Universe and channel are fully configurable for every cube in the Hyperspace app. An unpatched universe can't black out the rig, and if your pixel stream stops, the cubes go back to their own patterns after 8 seconds.
Pixels by product
Every LED is individually addressable, 170 pixels per universe.
Pixel data starts on universe 2 by default. Control and pixel universes and the start channel are all configurable in the Hyperspace app. Channel maps, pattern and palette numbers are in the full DMX guide.
Ready to patch in?
Download the GDTF fixture profiles for your console and the full Art-Net / DMX guide, with channel maps, pattern numbers and troubleshooting.