FAQ
First, connect the control box to the HyperCube. Next, simply plug the power adapter into an outlet and connect it to the control box. Let there be light!
The HyperCube will blast out photons as soon as it’s plugged in. By default it will play patterns from the “Kaleidoscopic” mode, changing pattern every 60 seconds and generating new random colors every 10 seconds. You can manually change the pattern with a single press of the button on the control box, and change mode with a double press. Holding the button for 2 seconds turns the LEDs off. For additional control and customization, download and connect the Hyperspace Lighting app!
Yes! The app is used to fully control and customize the cube, but the HyperCube is entirely functional without it. Patterns can be switched with a single press of the button on the control box, modes can be changed with a double-press, and the device can be turned off with a long-press. Syncing multiple cubes does require a home WiFi network and connection to the app.
Absolutely! The app connects via wifi, but you don’t need to be at home to use it. The cube has its own wifi hotspot that you can connect to from anywhere. So if you’re at a festival, out in the desert in the middle of nowhere, etc, you’ll have no problem connecting to the cube and controlling it!
Yes! The infinity effect is visible from every side and every angle.
A microphone in the control box detects incoming sound then our software analyzes it, converting high, mid, and low frequencies into lighting effects. The result is an ultra-responsive lightshow, visualizing your music with light! There are 31 unique, specially-designed sound reactive patterns that the cube will rotate through when in "Sound Reactive" mode. You can also make any of the other patterns sound reactive by syncing their brightness to the beat from within the app.
Yes! Our content usually features the more energetic "Kaleidoscopic" patterns, but there are 24 calm, slow patterns found in the Meditative mode setting.
The HyperCube Nano comes with a stand. The HyperStand can be purchased separately for the HyperCube10 and HyperCube15, or can be purchased as a bundle with those HyperCubes.
Our controller does allow for wireless WiFi E1.31 control out of the box, but we’re looking into other cable adapters that will allow the cube to be hooked into compatible controllers.
Smarthome integration is in the works! We plan to add Google Home, Alexa, HomeKit, and more in the near future. We expect to have this ready as a free update to our app later in 2025.
Try resetting the WiFi connection by holding the button on the control box for 10s until the LEDs in the cube flash green. Then try the different connection processes in the manual again, including the standard “Add New Hyper-Device” process and the “Can’t Connect” process at the bottom of the connection screen. It may help to reset the WiFi after each attempt. See our support section more more details [hyperlink to support page].